Compass, a fast-drying, highly durable one- part polyurethane gloss varnish, allows you to reduce your work time and labour efficiency, without compromising on aesthetics or protection. Apply two coats per day - the fast-dry formulation minimises dust contamination - and sand only after every 2nd or 3rd coat. Super flow and application characteristics ensure a professional, long-lasting finish that will deliver maximum resistance to abrasion, chemical, water and alcohol spills. Compass is ‘light amber' in colour, to emphasise the colour and appearance of natural wood. Contains HALS and UV absorbers for superior UV resistance
Tough and abrasion resistant, UV resistant and fast drying, Goldspar® Satin offers the same features as its gloss counterpart but dries to a beautiful satin finish.
Interdeck is a tough polyurethane low sheen deck coating containing a fine mineral aggregate providing a hard wearing, slip resistant surface. It is easy to apply, by brush or roller, on all substrates.
Interprotect® is a quick drying, easy to apply two-pack epoxy primer for high performance protection on all rigid substrates.
It's two-component application gives excellent anti-corrosive and abrasion resistance properties and it can be used equally above or below the waterline.
A conventional general purpose yacht varnish with good gloss retention, UV filters and excellent non-blooming qualities.
Original is easy to apply over any type of existing varnish and easy to re-coat. It is suitable for interior and exterior use, whatever the construction.
Perfection® is the ultimate performing, 2-part polyurethane gloss finish. It provides the longest lasting, ultra
high-gloss finish that has superb colour retention, together with excellent chemical, impact & abrasion resistance.
It has been formulated specifically to enable amateur users to achieve professional quality results with ease on topsides, superstructure & decks.
Perfection® gives you:
Ultra high-gloss finish with exceptional colour & gloss retention
Longest lasting results - contains a unique package of HALS/UV† absorbers together with a chemically cured polyurethane resin system which protect against premature ageing
Exceptional durability - gives prolonged impact & abrasion protection even on the highest wear areas
Resistance to a wide range of chemicals including fuels, mild acids & detergents
† HALS = Hindered-amine light stabilisers
Note that this product now has a NEW mix ratio of 2:1. Read the product label for guidance
A high performance, extremely tough, long-lasting two pack undercoat for use under Perfection® finish. The semi-gloss finish allows easy checking of hull fairness. Excellent covering power (opacity).
Undercoat for Toplac or Brightside®. Pre-Kote is easy to apply and the excellent obliteration characteristics means easy colour changing. Pre-Kote is designed around tough, flexible resins which means it is long lasting and easy to apply and rub down. It provides a smooth base for the finishing coat.
Pre-Kote is suitable for all suitably primed wood, steel, alloy and GRP surfaces.
A quick drying, general purpose below waterline primer which has been formulated for use on metal keels and hulls prior to antifouling. It is however also suitable for use as a barrier/sealer coat between unknown or incompatible antifoulings.
Schooner Gold has been formulated using an optimised blend of premium UV absorbers, HALS and resins to ensure the product's exceptional deep gloss and colour are retained over the lifetime of the coating. Developed as a high gloss yacht varnish, with a traditional golden hue, our tests results show that the gloss retention of Schooner Gold outperforms other leading varnish products, when tested in Florida over an 18 month period. Schooner Gold replaces our current Schooner product, where the higher build properties and improved self-levelling in this new formulation allow you to achieve a professional finish in 4-6 coats; sanding between every other coat, reducing your work time. Formulated for use without the need for thinning in warm and higher temperature climates.
Toplac's silicone alkyd formula is extremely smooth-flowing, producing a very high gloss. Superior UV filters combine with this to produce a surface which will retain its colour and gloss up to three times longer than conventional gloss paints.
VC® Tar 2 is a two-component epoxy primer which protects against osmosis on GRP, and provides anti-corrosive protection on steel and alloy. It's advanced self-levelling formulation allows it to be overcoated without the need for sanding.
A quick-drying epoxy filler for long lasting repairs to small areas on suitably primed GRP, metals and rigid wood constructions.
Its key benefit is a fast curing time, excellent for filling small areas quickly and so ideal for the DIY yachtsman. This super-smooth 2-pack formulation has a matt blue finish and can be used on areas above or below the waterline to fill holes at up to 2cm depth per application.
Watertite has excellent resistance to water penetration.
